On This Page

  1. How to Paint Kitchen Cabinets?
  2. Get a Free Cabinet Painting Estimate
  3. What Does Cabinet Painting Really Cost?
  4. Looking for a Cabinet Quote?
  5. Can Something as Simple as Painting Kitchen Cabinets Transform the Entire Space?
  6. What Color Options Do You Have for Painting Your Kitchen Cabinets?
  7. Prepping Your Cabinets for Painting
  8. Remove Cabinet Doors, Drawer Fronts, and Hardware.
  9. Clean the Cabinets as You’ve Never Cleaned Before.
  10. Sand the Cabinet Surfaces.
  11. Prime the Cabinets.
  12. Sand the Cabinets Again.
  13. Transform the Look of Your Kitchen Cabinets.
  14. The Cabinet Painting Process
  15. Cabinet Painting vs. Staining
  16. Painting Inside of Cabinets
  17. What Paint Should I Use for Kitchen Cabinets?
  18. Do I Need to Sand Cabinets Before Painting?
  19. How to Paint Old Kitchen Cabinets?
  20. Start by Removing the Cabinet Doors, Drawers, and Hardware
  21. Thoroughly Clean the Cabinets
  22. Fill Holes, Dents, Grooves, and Other Irregularities
  23. Sand the Irregularities and Clean the Surfaces
  24. Apply the Primer
  25. Apply the Semi-Gloss Latex Paint
  26. Install the Hardware Back in Place
  27. How to Stain Wood Cabinets?
  28. Start by Sanding the Wood
  29. Apply the Wood Conditioner
  30. Apply the Stain with a Circular Motion
  31. Apply the Wood Finish
  32. How to Paint Kitchen Cabinets with a Sprayed-On Finish
  33. How to Add Trim to Kitchen Cabinets
  34. What Product Should I Start Using?
  35. Start Dressing the Kitchen Cabinets with the Trim
  36. Follow These Directions for Cutting the Trim
  37. How to Use a Nail Gun to Affix the Molding
  38. How Long Do I Need to Wait for the Molding to be Ready?
  39. Best Paint for Your Next Cabinet Project
  40. Acrylic vs. Alkyd Paint
  41. Advantages of Alkyd Enamel Paints
  42. Disadvantages of Alkyd Enamel Paints
  43. Advantages of Acrylic Paints
  44. Disadvantages of Acrylic Paints
  45. Cabinet Refinishing and Repainting
  46. What is Cabinet Refinishing?
  47. Cost of Cabinet Refinishing / Refacing and Painting Services
  48. Choose the Right Paint

How to Paint Kitchen Cabinets?

Kitchen Cabinets Before PaintingKitchen Cabinets After Painting

Before Painting                                                                          After Painting

Why replace when you can repaint and enamel? Replacing your existing kitchen cabinets is a costly and time-consuming way to achieve the kitchen of your dreams.

The easiest and most cost-effective way to update your kitchen or bathroom is to apply a fresh coat of paint to the cabinets.

You can learn the process we take to paint kitchen cabinets, ask us.

Get a Free Cabinet Painting Estimate

You can call us now for a free cabinet painting or cabinet painting estimate! (949) 577-8843

What do you think of this color transformation? Are you thinking about starting your own cabinet painting project soon? Call us for a free estimate!

Looking for how much it will cost to paint or get your existing kitchen cabinets looking professionally? It’s more affordable than you think! Visit our online quote form to get your free estimate today! Kitchen cabinet refinishing, repainting, and spray-painting company.

What Does Cabinet Painting Really Cost?

Pros of painting your cabinets.Kitchen Cabinet Estimate

Cost. Let’s start with the most obvious benefit of painting over replacing – the costs.

Repainting your cabinets will be more cost-effective and much faster to get the look you always dreamed of.

When you contrast the minimal cost of paint and materials to the incredibly high cost of new kitchen cabinets, painting your cabinets is a clear winner.

Looking for a Cabinet Quote?

And since we’re a local painting company, we can come out to your house to look at your cabinets, discuss painting options, and then provide an accurate quote – usually the same day.

If you are ready for that fresh look, contact us today and get a free cabinet painting Orange County CA and cabinet painting 1st Painting Contractors quote for turning your kitchen or bathroom cabinets from old to new and modern! We can show you the previous cabinet reglazing Lake Forest, CA, and cabinet re-glazing project pictures to get a good idea of what you can expect.

After following us on Instagram or Pinterest for a while and being impressed with our crew’s transformations to cabinets, you may want to go on the website and requested a quote.

Can Something as Simple as Painting Kitchen Cabinets Transform the Entire Space?

This doesn’t mean you have to completely remodel your kitchen; instead, something as simple as painting kitchen cabinets can help transform the entire space.

Though it may look simple, the amount of attention-to-detail and work process controls for painting kitchen cabinets can only be attained by a highly experienced painter.

What Color Options Do You Have for Painting Your Kitchen Cabinets?

Here is a color palette from Dunn Edwards

Dunn Edwards Kitchen Cabinets Color Palette

Prepping Your Cabinets for Painting

One of the first steps when painting your kitchen cabinets is prepping your cabinets for painting.

Remove Cabinet Doors, Drawer Fronts, and Hardware.

You’ll want to remove cabinet doors and drawer fronts for painting.

For a uniform paint finish, empty the cabinets and remove the cabinet doors, drawers, and hardware (knobs, pulls, and hinges).

Remove the cabinet doors (including drawer fronts) and hardware (including hinges), applied wood filler to cracks and hardware holes, let everything dry for a few hours, lightly sand the putty spots by hand, and refilled them with a second layer of wood filler wherever necessary, then and again to a smooth finish.

Clean the Cabinets as You’ve Never Cleaned Before

After removing the hardware, we recommend that the cabinets be thoroughly cleaned with a good cleaner degreaser to remove all grease and oils that normally buildup on kitchen cabinetry over time.

Use a de-greaser detergent in your water and a non-scratch yet abrasive pad (something you might use to clean a non-stick skillet), and really scrub hard! I thought I had cleaned my cabinets very well, but I noticed a few grease dots showing through the paint after painting.

We painted Karen’s kitchen cabinets over a year ago; we cleaned, sanded, primed, and then painted with an enamel finish paint — full details here.

Sand the Cabinet Surfaces

If your repainting project is just a facelift for the cabinets, you don’t need to sand and paint the inside of the cabinets; mask off the interiors with painters’ tape for a clean finish and sand only the front surfaces and visible edges of the cabinet face frames.

To prep all of the cabinets for painting, I sand all surfaces with a fine-grit sandpaper.

Using 220 grit sandpaper, we sand all the surfaces (inside the cabinets and the cabinet doors).

Prime the Cabinets

Priming Kitchen Cabinet DoorsLaminate cabinets require a special bonding primer. The laminate must be in good condition for the best results.

Apply primer to all the cabinets. Primer bonds with the cabinet surface and ensures the paint will adhere to the cabinets and won’t peel or chip.

We decided on the Misty Hillside by Dunn Edwards for our cabinets and went with Navajo White semigloss paint for our walls in the shade, which I learned you could order it with a primer component mixed in.

Sand the Cabinets Again

Whether or not you previously painted or varnished the cabinets, sanding is a must to achieve your best results.

On different cabinets, I used tsp (tri-sodium phosphate) mixed with water instead of removing gloss to clean the cabinets and then sand, if needed.

If you start by sanding the cabinets, it will lead you to the first mistake.

Transform the Look of Your Kitchen Cabinets

You may go with rust-ileum cabinet transformations 9-piece dark color kit DIY do-it-yourself kitchen cabinet paint coating system and completely change the dated or worn-out looking of your cabinets for a fraction of the cost of purchasing new ones.

Although this process requires you to have the experience, it can literally transform into a beautifully updated kitchen! Once you apply this process, you will see, painting the cabinets completely transforms your kitchen.

Painting kitchen cabinets can feel intimidating or even improper, but I believe it’s one of the easiest, most affordable ways to completely transform your kitchen.

The Cabinet Painting Process

Moreover, cabinet refinishing is a much higher quality process than just “painting” your cabinets, not to mention it is better for the environment.

In a nutshell, this is our process for cabinet painting in South East Orange County, CA (we’ll share much greater detail with you in person).

We will follow the process that best applies to your current house conditions for your cabinet-painting needs.

Cabinet Painting vs. Staining

Depending on the finish you want your kitchen cabinets to have, staining your cabinets will allow you to see the natural wood grain. Since the stain is much thinner than the paint, this allows the wood to absorb it into its grain, showcasing the wood grain intricates. It also displays unique natural features your cabinet’s wood species have. On the other hand, painted cabinets are typically 15 to 20% more expensive than stained cabinets. This is why there would be an upcharge for the clean, smooth, sleek, and shiny paint’s look.

Painting or staining can improve your cabinets’ look, but it can’t eliminate the issues inherent with bad or outdated cabinet design or structural problems.

We’re offering cabinet staining, custom cabinet painting, and refinishing!

Painting Inside of Cabinets

When you are thinking of just brushing some eggshell latex on your cabinets to show your spouse the difference in durability between just painting your cabinets and having a painter apply a quality coating to them, you will come to appreciate that is worth hiring a professional for the job.

The first rule of cabinet repainting: make sure the cabinets and doors are clean and dry.

The second rule is to ensure that they have a smooth surface free of holes, cracks, dents, fine irregularities, and free warp areas.

The final third rule is to make sure you have filled these uneven surfaces with wood putty and sand them to a smooth finish, ready to apply primer and paint.

What Paint Should You Use for Kitchen Cabinets?

ARISTOWALL® is an ultra-premium interior enamel line formulated with advanced waterborne alkyd technology, ideal for cabinet painting. It allows you to refresh any kitchen on a budget and upgrade your cabinets.

How to paint kitchen cabinets is one of the most frequently asked topics we get in emails and our customers’ comments.

Do you enjoy the current function and layout of your kitchen? If you have too little storage, painting cabinets obviously won’t help with that! It’s essential that your kitchen performs as you need it to and is not just in need of an aesthetic update.

Do I Need to Sand Cabinets Before Painting?

We advise you to sand your kitchen cabinets before you start to paint them. This process will allow the new paint a good surface to grip on without peeling off. But it is not necessary you sand to bare wood. If your cabinets have a factory finish, all you need is light sanding with 120-grit sandpaper or an angled sanding sponge that will be ideal for sanding corners or beveled edges.

It would be best if you double-checked that you have removed all of the sanding dust from your cabinets before moving on with the painting process to ensure that you don’t get any of it stuck within the paint be considerably harder to remove after the fact.

We don’t recommend this option to many modern cabinets with laminate fronts since sanding and painting will likely end with underwhelming results.

I can easily believe it. I have directly reached out to several DIY home flippers to tell them that skipping sanding and priming is a sin when it comes to painting kitchen cabinets, only to be shunned off.

How to Paint Old Kitchen Cabinets?

Painting your kitchen cabinets is the single most transformative decision you can make to your kitchen without a gut renovation.

Start by Removing the Cabinet Doors, Drawers, and Hardware

Remove the cabinet doors, drawers, and all knobs, pulls, latches, hinges, and other hardware. Keep every part – hardware and screws – organized in plastic bags inside the cabinets near where you pulled them out. They will be easy to find when you need them to reassemble.

Mark each door with a number and its matching location as you remove them. Be careful not to mix them up, or the hinges will not line up properly when you try to reinstall them. When you are only painting the drawer fronts, you won’t need to remove the attached drawer sides.

Thoroughly Clean the Cabinets

Even when they don’t look dirty, greasy, or full of grime, clean them completely, working your way into your cabinets’ surface—mix trisodium phosphate (TSP) with water as per the instructions show. Protect your hands and wear gloves, let a sponge absorb the mixture on both sides of the cabinets, and wipe off the chemical with a clean cloth.

Fill Holes, Dents, Grooves, and Other Irregularities

Compound to Fill HolesFilling Holes Cabinet Doors

Anytime your cabinets have holes or surface irregularities:

  • Fill the holes with a wood filler.
  • Wipe away all excess with a damp cloth
  • Squeeze about a 3/4″ strip of the hardener from the tube
  • Mix with a putty knife, and spread into holes and dents, slightly overfilling them

Sand the Irregularities and Clean the Surfaces

Allow the filled areas to dry, and then use fine-grit sandpaper to smooth out the cabinets’ surface.

If your repainting project is just a cabinet facelift, you don’t need to sand and paint the cabinets’ inside. Mask off the cabinet interiors with painters’ tape and plastic to cover all the areas you will not touch. Sand only the front surfaces and visible edges of the cabinet face frames, then clean the dust with a damp cloth.

You may use a wooden sanding block to prevent rounding over the wood edges. During the sanding process, you don’t need to remove all the old paint if it is smooth and well-adhered. You only need to make the surface rough to provide the new paint with a firm, clean surface for a better bond. Pay special attention to the old paint finish’s specific worn areas, which typically get the most use. Make sure to sand over shiny areas to remove the glaze from any remaining previous finish. Obstinate finishes may require you to apply a paint stripper and fine steel wool and successfully remove the paint.

If the old paint is flaking off in various places, the original finish did not bond well to the wood surface. This is typically due to moisture or greasy residue getting under the paint layer or into the wood itself, which can be expected in kitchen areas. For best results:

  • Sand these areas to bare wood
  • Spot-prime with a stain-killing primer/sealer before repainting
  • Blend or harmonize the edges where the old paint meets the bare wood until the new paint will settle flat, and the paint edges will be perfectly combined through the new finish.

If you have a pneumatic air compressor, use high-pressure air to blow the dust out of cracks and grooves. Wipe down the areas to be painted with a tack cloth to pick up any remaining sanding residue. Thoroughly wipe off the sanding dust from all surfaces with a damp cloth.

Apply the Primer

Use a top-quality primer-sealer to:

  • Apply an even coat to all cabinet surfaces and guarantee a quality bond finish coat.
  • Reduce the need to sand and strip the glaze off from old finish surfaces before repainting.
  • Provide a good base for semi-gloss, water-based paint.

High-gloss enamel paint was once the preferred finish for kitchen cabinets because it resists stains and water and is easily cleaned. Still, today’s water-based finishes are easier to work with and provide an equally durable finish.

Apply Semi-Gloss Latex Paint

Before painting, sand lightly and prime. The best primer for kitchen cabinets depends on the wood grain.

Apply the paint in the following manner:

  • Start painting the inside edges and openings of the face frames.
  • Then continue painting the outer cabinet sides.
  • Finally, proceed with painting the face frame fronts.

This process allows you to paint quickly through the less critical areas and empower you to see and correct possible drips or smudges.

Next steps:

  • Paint the cabinet doors and drawer fronts
  • Continue with separate wood pieces or moldings.
  • Make sure to apply paint into cracks and corners when there are raised or routed feature parts.
  • Apply the paint with a light coat as these leave fewer visible brushstrokes

When you apply too many brush strokes on the wooden surface, it will develop air bubbles in the finish when it dries. For this reason, it is best not to lay a thick finish and damp the brush with too much paint.

Allow the paint to dry for two to four hours between coats, depending on the air humidity. Once the paint dries, sand all surfaces lightly again and wipe away all sanding dust before applying the second coat. You may need to add a third coat when the kitchen has a busy area from cooking and day-to-day usage.

Install the Hardware Back in Place

Allow the paint to dry, then re-install all hardware, and hang your newly painted kitchen cabinets.

Re-install the hardware back in place for the doors and drawers, be careful not to create marks on the newly painted surfaces, and make sure the pulls, handles, and knobs all lay in place perfectly perpendicular to the edge of the doors and drawers.

How to Stain Wood Cabinets?

Start by Sanding the Wood

It works best with unfinished cabinets; we recommend you buy either birch or oak. Birchwood is consistent:

  • Straight with a fine and even grain fashion
  • Some parts have more like a wavy grain.
  • Other pieces may carry a curl style like cherry.

Repeatedly, we paint these cabinets…and the stain looks great on them. When we apply a cherry stain, the birch will resemble more like cherry.

Make sure you prepare the wood thoroughly regardless of the wood type. Start by sanding the wood lightly with 120-grit sandpaper and make the strokes in the same direction as the wood grain, or you won’t get good results.

You need to dust off the wood, then continue with a second sanding process with 220-grit sandpaper. This finer sandpaper is designed to remove any scratches from the first sanding. It will provide the wood with a much smoother finish.

Apply the Wood Conditioner

Wood Stain Process - Apply Wood Conditioner              Wood Stain Process - Apply the Stain

Apply Wood Conditioner                                                                       Apply the Stain

Wood Stain Process - Remove Excess Stain              Wood Stain Process - Remove Stain Completely

Remove Excess Stain                                                          Remove Stain Completely

Remove all the dust with a damp cloth, let it dry and apply a coat of wood conditioner to seal it and help the stain spread evenly.

Apply the Stain with a Circular Motion

When you are ready to start applying the stain, cover it circularly. This step will allow the stain to get in deep into the wood grain. Repeat this process twice on the woodgrain for a final smooth result.

Apply the Wood Finish

Keep in mind that wood stain doesn’t protect the wood; it only gives it the color you want. On the other hand, the finish puts a coat of protection on the outer surface of the wood. When you use an oil-based stain, you will need to use an oil-based polyurethane for your finish. We recommend you apply two coats as it will safeguard your wood’s protection.

Wood stains come in a wide range of shades and make your cabinets look like they were made from a different type of wood.

How to Paint Kitchen Cabinets with a Sprayed-On Finish

Instead of outright replacing their kitchen cabinets, homeowners should give thought to having their cabinets refinished or repainted.

At 1st Painting Contractors cabinet painting, located in Orange County, CA, you can get the best quality service for your cabinet painting, refinishing, and restoration needs for your kitchen or bathroom cabinets.

Though it may look easy, I can tell you that painting your cabinets is a lot of work, and we are frequently honing our process to get custom results for our clients. We have found out that when we stick to our process with our unique techniques and tricks, we can tackle difficult projects for your kitchen cabinets and positively end up with a delightful finish.

How to Add Trim to Kitchen Cabinets

It’s the same process that you put the current molding on the wall. Now, why would somebody even want to add molding to just jazz up your kitchen? This is going to add a little detail, make it look a little fancier.

These basic cabinets will need:

  • Painter’s Tape
  • Wood Glue
  • Miter Saw
  • Nail Gun and
  • Pencil
  • Molding

And finally, don’t forget your safety glasses. Safety never takes a vacation.

What Product Should I Start Using?

Most old cabinets have seen a couple of decades of wear and tear. Before we even begin, we need to start with a product called Rejuvenate, which wipes away a few years of abuse in just a few minutes.

Start Dressing the Kitchen Cabinets with the Trim

But now let’s get ready to dress up the cabinet, and the first thing we’re going to do is cut one end of the molding piece that’s going to go on the front of the cabinet, and then we’re going to trace the other end. Tracing is much more accurate than trying to measure each piece. It’ll be a much cleaner job if you just trace your cuts.

Follow These Directions for Cutting the Trim

We’re going to start the first cut forty-five degrees because our cabinet, the front, and the side of the cabinet are 90 degrees to each other. So, half of it is forty-five degrees. We’re going to start up the saw and make the first cut.

We’re going to take our cut end and hold that on the end of the cabinet. Next, mark the other side of the cabinet.

Make sure you keep the mark for the edge of the cabinet, and our cut will be right on the side of the mark. Moving on, we’re going to flip this molding the other direction and bring down the side of your line.

How to Use a Nail Gun to Affix the Molding

As the molding fits the cabinet’s front perfectly, we grab our nail gun, turning the gun sideways. If you’re holding a nail gun not right on the end of the molding, it’s going to split if you’re using hardwood. Now, the best bet is just to eyeball your measurements.

I mean, we wouldn’t get a level out at this point. Whether it is straight or not, it’s all an illusion. You need it to make it look straight.

As you finish on the front and are looking good, now onto the cabinet’s sides because one side of the molding will hit the wall. We set our side at 90 degrees to create a flat cut.

Take it back to the saw. Now, on this particular piece, we’re doing an outside corner cut, returning this to forty-five degrees that you just have to sort of visualizing whether you’re doing an inside corner and outside corner and what the direction of your cut will be. I always try the molding pieces dry if you need to cut it again, not a big deal. Apply the glue now before you get glue all over the side.

It always helps to buy a little bit extra molding in case you mess up. Always buy a little bit extra.

Next, we’re going to put glue on the miter. It’s a nice tight bond with wood glue.

We glue the corner and then now affix the side molding into place.

We’re going to tape the corner together and let the glue dry. The glue is always stronger than the nails.

How Long Do I Need to Wait for the Molding to be Ready?

Tomorrow you can pull this off, and everything will be fine. Wait about twenty-four hours for the glue to dry fully. Next, let’s move onto the other side. We get our second side of molding up, and suddenly this great cabinet is not so basic anymore. You can use up your entire kitchen for less than one hundred dollars, and it should take no more than a weekend to tackle this intermediate project.

Best Paint for Your Next Cabinet Project

Painting your cabinets will allow you to update your kitchen with trendy hues without a full renovation. It’s a good alternative to freshen the look of your space without breaking your budget. The best paint for cabinets can vary from alkyd to acrylic paint.

When selecting cabinet paint, make sure manufacturers recommend it for use on cabinets. The best paint type for kitchen cabinets is generally satin, semi-gloss, gloss, or high gloss. Matte is not applicable for kitchens and baths, as the humidity will easily erode the paint.

You will get the best painting results by prepping your cabinets before you start painting. Clean them thoroughly with the recommended cleaner and remove any residue and dust. Prime the cabinets for a professional look and long-life performance.

Completely relying on hiring a professional to paint your cabinets is usually more expensive. Luckily, painting your cabinets is a project you can totally handle on your own for a fraction of the cost.

Acrylic vs. Alkyd Paint

Alkyd Enamel has been the preferred coating for many painters for interior applications like trim, molding, cabinets, windows, and doors. Generally, the term “enamel paint” describes an oil-based paint, and it contains a significant amount of gloss. They were originally oil-based paints, but they don’t contain any oil in the basic chemical makeup. Most alkyd enamel paints today have a resin composition.

In recent times manufacturers are labeling many latex or water-based paints as enamel as well.

There are several differences between alkyd paints and latex-based paints, including the thinner and binder used in the paint. A small amount of the thinner improves the texture and paint flow as it eases its paint application.

Acrylic paint is made of pigment particles dispersed and suspended in a polymer emulsion solution and acrylic resin. These paints are chemically based as they become water-resistant when they dry.

There are four types of Pigments:

  • Organic
  • Inorganic
  • Natural
  • Synthetic

A binder is a substance that keeps the pigment accessible even after the paint dries. Binders are polymers or resins that form an endless film on the substrate surface. Every paint main ingredients are binders.

Binders’ main responsibility is to provide a good coating bond to the substrate. The binder keeps the pigment particles evenly dispersed in the coating. The binder is distributed in its water or organic solvent carrier in molecular form or as colloidal emulsion dispersion.

Advantages of Alkyd Enamel Paints

For a durable and resistant paint, go for alkyd as they perform extremely well under heavy humidity and moisture and resist wear-and-tear. Painters broadly prefer these paints for high traffic areas such as:

  • Hallways
  • Playrooms for Children
  • Kitchens
  • Bathrooms
  • Cabinets
  • Furniture

Alkyd paints offer a lustrous, heavy-duty finish that performs well to dirt and stains.

Disadvantages of Alkyd Enamel Paints

They are not as eco-friendly as latex paints as they use chemical solvents, and they discharge toxic Volatile Organic Compounds (VOCs).

Advantages of Acrylic Paints

Acrylic paints are water-based, as you can make them thinner by just adding water. Also, you can remove the wet paint from brushes with just soap and water. When you’re painting a smaller area, and you want a fast-drying time, acrylic paints are your best choice.

Disadvantages of Acrylic Paints

Acrylic paints aren’t heat resistant and contain toxins within their pigment particles, just like some oil-based paints do. You can also find toxins in acrylics that use retarders – usually added to water – to give more time for blending or layering highlights as the drying time slows down.

It does not mix well with oil-based paints and won’t bond to a wall previously painted with oil paint.

Cabinet Refinishing and Repainting

1st Painting Contractors specializes in professional kitchen and bathroom cabinet repainting and refinishing.

If your cabinets are in good physical shape, refinishing may be a more inexpensive option for you and restore your kitchen’s look to their original beauty. It’s much easier to refinish your cabinets when they are free from:

  • Cracks
  • Chips
  • Dents
  • Cuts
  • Nicks
  • Gouges
  • Wraps
  • Worn Edges

These are typical signs of normal aging wear and tear due to its high traffic use.

You should contemplate Cabinet Refinishing is your first option when you’re preparing for a kitchen upgrade.

What is Cabinet Refinishing?

Kitchen cabinet refinishing simply means that you keep all the hardware in the same place, keep all the drawers and doors exactly as they are. You just change the paint color finish of the face of your existing cabinets.

The painter will remove the doors and drawers, sand all the surfaces, clean them, prime them, and apply two paint coats. In the case when you want the cabinets stained, the painter will remove the current finish by sanding all surfaces with a medium to low-grit sandpaper, apply a pre-stain sealer, next apply the chosen stain with a cloth or a soft paintbrush in a circular motion and allow it to penetrate the wood grain, then remove all the excess stain and finally apply a light coat of clear varnish or polyurethane sealer and give it an extra layer of shine and protection.

Cost of Cabinet Refinishing / Refacing and Painting Services

Cabinet Refinish Costs

Cabinet refinishing costs on average $2,825 with a typical range from $1,718 to $3,947. It’s much cheaper than a new cabinet installation or even refacing. You should expect to pay between $4 to $12 per square foot, including labor and materials. For an old-fashioned look, materials run an average between $12 and $27 per square foot. Only labor costs run anywhere between $35 to $80 per hour.

Cabinet Refacing Costs

Refacing cabinets costs, on average, anywhere between $6,500 to $22,000, with the typical homeowner investing around $13,500 on refacing their kitchen cabinets, including raised panel doors and updated hardware.

Kitchen Cabinets Painting Cost

The average cost to paint cabinets is $3 to $12 per square foot or $35 to $65 per linear foot, including all materials and professional labor. Painting contractors typically charge $45 to $125 per door, $127 to $175 per cabinet, and $15 to $35 per drawer. The average total cost ranges between $925 – $3,976.

When you want to paint your kitchen cabinets surfaces, you want to make sure your prep is on point.

Call us today and get your free estimate!

Are your cabinets starting to look worn out with fading paint? Let us refinish them for you!

Choose the Right Paint

You can request paint samples from your local paint store to try on your cabinets to compare how they look after the paint dries.

If you want your cabinets to look professionally painted, then opt for a primer as the base. A primer will set the surface ready to receive the final paint you choose. Select a primer with strong bonding properties and then apply an oil-based or latex-based paint once you have let the primer cure.

There are an array of options you can choose to paint your kitchen cabinets. Ask your local paint store for the various options and benefits each one has, or give us a call, and we will gladly help you.